TIG056BF no. a1775-1/4 features ? low-saturation voltage ? ultrahigh speed switching ? enhansment type speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-emitter voltage v ces 400 v gate-to-emitter voltage v ges 33 v collector current (pulse) i cp v ge =15v, c m =2000 f 240 a allowable power dissipation p c tc=25 c30w channel temperature tch 150 c storage temperature tstg -55 to +150 c package dimensions unit : mm (typ) 7509-005 ordering number : ena1775a n2411 tkim tc-00002672/90110qj tkim tc-00002415 sanyo semiconductors data sheet TIG056BF n-channel igbt high power high speed switching applications http:// semicon.sanyo.com/en/network product & package information ? package : to-220fi(ls) ? jeita, jedec : sc-67, sot-186a, to-220f ? minimum packing quantity : 100 pcs./bag, 50 pcs./magazine marking electrical connection tig056 lot no. 2 1 3 16.0 14.0 3.6 3.5 7.2 16.1 0.7 2.55 2.55 2.4 1.2 0.9 0.75 0.6 1.2 4.5 2.8 123 10.0 3.2 1 : gate 2 : collector 3 : emitter sanyo : to-220fi(ls) www.datasheet.co.kr datasheet pdf - http://www..net/
TIG056BF no. a1775-2/4 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector-to-emitter breakdown voltage v (br)ces i c =2ma, v ge =0v 400 v collector-to-emitter cutoff current i ces v ce =320v, v ge =0v 100 a gate-to-emitter leakage current i ges v ge =30v, v ce =0v 10 a gate-to-emitter threshold voltage v ge (off) v ce =10v, i c =1ma 2.5 5.0 v collector-to-emitter saturation voltage v ce (sat) i c =240a, v ge =15v 3.6 5.0 v input capacitance cies v ce =20v, f=1mhz 5500 pf output capacitance coes 100 pf reverse transfer capacitance cres 70 pf turn-on delay time t d (on) v ce =320v, i c =240a, v ge =15v, r g =10 46 ns rise time t r 32 ns turn-off delay time t d (off) 140 ns fall time t f 270 ns fig1 large current r load switching circuit 100k c m r l r g v cc + TIG056BF v ge i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a i c -- v ge gate-to-emitter voltage, v ge -- v collector current, i c -- a it15776 0 0 50 150 100 300 200 250 it15777 0 0 12 5 34 6 50 250 150 100 300 200 24 12 810 6 v ge =20v 15v 10v v ce =10v 8v 25 c 75 c tc= --25 c tc=25 c 12v tc=75 c - -25 c 25 c www.datasheet.co.kr datasheet pdf - http://www..net/
TIG056BF no. a1775-3/4 case temperature, tc -- c gate-to-emitter cutoff voltage, v ge (off) -- v v ge (off) -- tc collector-to-emitter voltage, v ce -- v v ce -- v ge gate-to-emitter voltage, v ge -- v case temperature, tc -- c v ce (sat) -- tc collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter voltage, v ce -- v v ce -- v ge gate-to-emitter voltage, v ge -- v collector-to-emitter voltage, v ce -- v v ce -- v ge gate-to-emitter voltage, v ge -- v collector-to-emitter voltage, v ce -- v cies, coes, cres -- pf cies, coes, cres -- v ce sw time -- r g switching time, sw time -- ns sw time -- i cp switching time, sw time -- ns collector current (pulse), i cp -- a gate series resistance, r g -- it15781 05075 100 125 150 25 --25 --50 5 6 4 3 0 1 2 i c =240a v ge =15v 4 3 0 1 2 it15778 24 6 5 8 61012 18 14 16 20 120a 60a tc= --25 c i c =240a 60a it15782 0 50 75 100 125 150 25 --25 --50 6 5 4 3 2 1 0 0161820 68 41214 10 2 100 7 5 3 10000 1000 7 5 3 2 7 5 3 2 it15783 cies coes cres f=1mhz 120a 4 3 0 1 2 it15779 24 6 5 8 61012 18 14 16 20 120a 60a tc=25 c i c =240a 4 3 0 1 2 it15780 24 6 5 8 61012 18 14 16 20 120a 60a tc=75 c i c =240a 23 57 5 3 2 100 10 it15784 5 3 2 7 7 5 3 2 100 10 t r t d (off) t d (on) switching test circuit fig.1 v ge =15v v cc =320v r g =10 t f 0 102030 50 40 60 80 90 70 110 100 it15785 1000 7 7 5 3 2 100 2 5 3 2 t r t d (off) t d (on) t f switching test circuit fig.1 v ge =15v v cc =320v i cp =240a www.datasheet.co.kr datasheet pdf - http://www..net/
TIG056BF no. a1775-4/4 ps this catalog provides information as of november, 2011. speci cations and information herein are subject to change without notice. note : TIG056BF has protection diode between gate and emitter but handling it requires suf cient care to be taken. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. gate-to-emitter voltage, v ge -- v collector current (pulse), i cp -- a i cp -- v ge collector current (pulse), i cp -- a main capacitor, c m -- f c m -- i cp it15715 50 100 150 200 0 250 0 500 1000 1500 2000 2500 tc 70 c v ge =15v v ce =320v it15714 15 20 35 30 40 25 10 5 0 0 50 100 150 200 300 250 tc 70 c c m =2000 f www.datasheet.co.kr datasheet pdf - http://www..net/
|
